Raisecom
ISCOM6800 (A)Hardware Description
The position of the hardware information label varies on component layout of a card.
Table 3-3 describes the hardware information label.
Table 3-3 Hardware information label
P/N
REV
Barcode
3.2 MCC (SMCA)
3.2.1 Functions
The SMCA card is the control, management, aggregation, and switching card of the
ISCOM6800.
Table 3-4 lists functions of the SMCA card.
Table 3-4 Functions of the SMCA card
Basic functions
Card protection
3.2.2 Panel and slots
The SMCA card can be inserted in the following slots of the ISCOM6800 chassis:
Figure 3-2 shows the panel of the SMCA card.
Figure 3-2 Panel of the SMCA card
Parameter
Name and type of the card
Hardware version of the card, where "A" refers to a release version
and "00" refers to a build
Barcode of the card
Function
Support bidirectional 1.28 Tbit/s Ethernet switching capacity.
Support managing cards in other slots through the backplane bus.
Provide the working clock for the system.
Support upgrading system software through the CF card.
Support card 1+1 redundant backup and hot swapping.
Slot 9
Slot 10
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Description
3 Cards
11