Table of Contents
Advertisement
Storage
USB
Display I/O
Audio I/O
LAN I/O
Serial ports
PS/2 keyboard/
mouse port
DIO
Fan
Back panel I/O ports
(Low profile)
Internal I/O
connectors
Chapter 1: General information
I/O
3 x SATA 6Gb/s
1 x SATA power connector (5V / 12V @1A)
2 x USB 3.0 ports (at back panel)
2 x USB 3.0 ports (internal box header)
4 x USB 2.0 ports (2 ports for header, 2 ports for minicard)
4 x USB 2.0 ports via ASIX MCS9990 (internal box header) (Default: No)
1 x LVDS (eDP optional by BOM change), 2 x HDMI
Mic-In, Line-Out, internal speaker
2 x RJ-45 ports on rear I/O
5 x RS-232
1 x RS-232/422/485 supports 5V/12V/RI option (COM1)
Yes (WOL / PXE)
8-bit Digital I/O interface (4-in / 4-out)
1 x Chassis fan connector (4-pin)
I/O Placement
1 x DC port (12V~24V, screw type)
2 x USB 3.0 ports
2 x LAN (RJ-45) ports
2 x HDMI ports
1 x Audio jack (Line-Out), green
1 x Audio jack (Mic-in), pink
1 x Mini Card slot (half-size Height=4mm)
1 x Mini Card slot (full-size Height=9.9mm)
1 x P/S2 header
3 x SATA 6.0 connectors
1 x SATA power connector
1 x USB 3.0 headers support additional 2 USB ports (2 x 10PIN, p=2.00mm)
3 x USB 2.0 headers support additional 6 USB ports (2 x 5PIN, p=2.00mm),
(Default:1 header onboard)
1 x Chassis fan connector
5 x boxer headers for COM (RS-232)
1 x boxer header for COM (RS-232 / 422 / 485)
1 x Digital I/O connector (4-in / 4-out)
1 x 40-pin LVDS / eDP connector (colay)
1 x LVDS 3V / 5V jumper
1 x LCD DC / PWM mode jumper
1 x LCD backlight connector (inverter)
1 x LCD backlight 12V / 5V jumper
1 x Battery horizontal socket
2 x Internal speaker (2W)
1 x 2*2 PIN DCIN 12V AUX power connector
1 x System panel connector
1 x AT/ATX mode select jumper (optional)
1 x CMOS jumper
1 x COM1 Ring/+5V/+12V selection jumper
1 x Chassis intrusion jumper
1 x Embedded DisplayPort (eDP)
1 x SPI flash programmable connector
(continued on the next page)
1-3
Advertisement
Table of Contents
