Table of Contents
Advertisement
3.
EATX power connector (4-pin EATX_PWR1)
This connector is for EATX power supply plug. The power supply plug
is designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
EMB-BSW1
EMB-BSW1 4-PIN (2x2)
internal power connector
4.
System panel connector (10-1 pin F_PANEL1)
This connector supports several chassis-mounted functions.
EMB-BSW1
EMB-BSW1 System panel connector
•
System power LED (2-pin +PWR_LED1)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin +HD_LED-)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
•
ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
2-12
EATX_PWR1
PIN 1
F_PANEL1
GND
PWRBTN#
PWR_LED-
PWR_LED+
(NC)
RSTCON#_PANEL
GND
HDD_LED-
HDD_LED+
PIN 1
EMB-BSW1
Advertisement
Table of Contents
