Table of Contents
Advertisement
12. Digital I/O connector (10-pin DIO1)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
EMB-BSW1
EMB-BSW1 DIO connector
NOTE: To configure the I/O pins in BIOS, go to the Advanced tab > Digital
IO Port Configuration > DIO Port 1~8. See section 3.3.8 Digital IO Port
Configuration for details.
13. SATA power connector (4-pin SATA_PWR1)
This connector is for the SATA power cable. The power cable plug is
designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
EMB-BSW1
EMB-BSW1 SATA power connector
14. Backlight inverter power connector (5-pin INV1)
Connect the backlight inverter power cable to this connector.
EMB-BSW1
EMB-BSW1 Inverter connector
NOTE: The backlight inverter power cable is purchased separately.
2-16
DIO1
PIN 1
SATA_PWR1
INV1
BLDN#_R
BLUP#_R
GND
GND
+BLVCC
+BLVCC
VCON
INV_ENABKL
PIN1
EMB-BSW1
Advertisement
Table of Contents
