Fan Hub Led Indicators - QuietCool RM WHF-4.0 Owner's Manual

9. Press the Test button to make sure the fan works. The Test LED indicator will blink three times
every two seconds indicating 3-speed and the fan will be on high. Press the Test button again and
the fan will switch to medium speed. Press the Test button again and the fan will switch to low
speed. Press the Test button again and the fan should shut off and the LED will be off.
10. If the fan doesn't operate as described in step 9, please check the dip switch postion.
11. You can connect up to 20 switches to a single hub.
3.2

FAN HUB LED INDICATORS

POWER INDICATOR
The Power LED
•
indicator will always
be lit when the Hub
is connected to
Power.
If this LED is not lit,
•
check the power
source
TIMER INDICATOR
The Timer LED
•
indicator will light up as
shown below:
1 Hour: 1 Blink
•
2 Hours: 2 Blinks
•
4 Hours: 4 Blinks
•
8 Hours: 8 Blinks
•
12 Hours: 12 Blinks
•
Continuous On: Off
•
NOTES ON OPERATION
If the Dip Switch is not configured correctly, all the indicators on the Hub will stay solid
•
when the Hub is powered on. Please switch off power and re-configure the Dip Switch as
shown in Figure 3.1A on pg. 11.
12
POWER TIMER
TEST
TEST INDICATOR
The Test LED indicator will
•
light up as shown below when
the Test button is pressed and
when the fan is turned on via
the Wall Switch:
High Speed: LED indicator will
•
blink three times every two
seconds
Medium Speed: LED indicator
•
will blink twice every two
PAIR
seconds
Low Speed: LED indicator
•
will blink once every
two seconds
PAIR INDICATOR
The Pair LED indicator will
•
light up when making pair
operations. Please see
below for details on pairing.
1-888-QUIETCOOL