Figure 3.1A
Hub Wiring Legend
Hot Wire
Neutral Wire
High Speed Wire
Medium Speed Wire
Low Speed Wire
Attic Fan
3.2
SMART CONTROL HUB - LED INDICATORS
POWER Indicator
•
The Power LED indicator will always be lit when the Hub is connected to Power.
•
If this LED is not lit, check the power source.
•
Temp and Hum | Timer Indicator
•
This LED indicator will light up as shown below:
•
Blinking: Timer Mode Active
•
Solid: Smart Mode Active
•
Test Indicator
•
The Test LED indicator will light up as shown below when the Test button is pressed:
•
Two Speed Fan: blink three times every 2 seconds on HIGH, blink once every 2 seconds on
•
LOW
Three Speed Fan: blink three times every
•
2 seconds on HIGH, blink twice every
2 seconds on MED, blink once every 2
seconds on LOW
Pair Indicator
•
The Pair LED indicator will blink when making
•
pair operations. Please see SETTING UP YOUR
FAN on page 12 for details on pairing.
The indicator will be lit up solid when a device is
•
connected via Bluetooth.
The indicator will not be lit when no pairing
•
operations are being made or no device is
connected.
QUIETCOOLSYSTEMS.COM
Attach green ground wires to ground screw
Speed
Bluetooth
POWER
Temp and Hum
Test
Pair
Timer
All White Common Wires Together
Set dip switches:
1 - OFF
2 - OFF
3 - ON
ON
1
2
3
Power
Cord
POWER
Temp and Hum
Timer
Speed
Bluetooth
Test
Pair
9