Table of Contents
Advertisement
3.3
SMART CONTROL HUB - LED INDICATORS
POWER Indicator
•
The Power LED indicator will always be lit when the Hub is connected to Power.
•
If this LED is not lit, check the power source.
•
Temp and Hum | Timer Indicator
•
This LED indicator will light up as shown below:
•
Blinking: Timer Mode Active
•
Solid: Smart Mode Active
•
Test Indicator
•
The Test LED indicator will light up as shown below when the Test button is pressed:
•
Two Speed Fan: blink three times every 2 seconds on HIGH, blink once every 2 seconds on
•
LOW
Three Speed Fan: blink three times every
•
2 seconds on HIGH, blink twice every
2 seconds on MED, blink once every 2
seconds on LOW
Pair Indicator
•
The Pair LED indicator will blink when making
•
pair operations. Please see SETTING UP YOUR
FAN on page 15 for details on pairing.
The indicator will be lit up solid when a device is
•
connected via Bluetooth.
The indicator will not be lit when no pairing
•
operations are being made or no device is
connected.
12
POWER
Temp and Hum
Timer
1-888-QUIETCOOL
Bluetooth
Speed
Test
Pair
Advertisement
Table of Contents
