First Steps With The Unitech Pa966; Installing The Battery Pack - Unitech PA966 User Manual

First Steps with the Unitech PA966

There are three ways to provide power to the PA966:
•
Rechargeable Lithium-Ion battery pack
•
RS232/Charging cable or USB/Charging cable
•
Docking Station
Data you enter may not be properly stored until the built-in backup battery has been adequately
Note:
charged. Please remember to turn on the back-up battery before you charge the terminal.

Installing the Battery Pack

1. Remove the battery compartment door using the flip-out battery
compartment latches located on the bottom of the PA966.
2. Position the battery pack with the recessed
contacts towards the bottom right side of the
battery (to line up with the battery contacts in the
battery compartment). Insert and fully seat the
battery pack, making sure the shape of the
battery pack fits the shape of the battery com-
partment.
3. Re-attach the battery compartment door with the battery compartment latches.
4
PA966/967 User's Manual