Fault Reset - Webasto Thermo Top V Operation And Maintenance Instructions

Fault Reset

D
The defect lock is incorporated in the auxiliary heater fuse holder in the engine
compartment.
Power interruption
by removing the
20A fuse (yellow)
Note:
The heater unit is switched on when the fuse is replaced.
If this action does not correct the fault, please contact a Webasto Service
station.
33
approx.
3 sec.
wait
Replace
the fuse
On
Briefly press Power interruption
the ON button by removing the 20A
on the left of fuse (yellow)
the transmitter
approx.
3 sec.
wait
Replacing the
fuse The heater
unit is switched
on