TiePie Handyscope HS6 DIFF Series User Manual page 5

Safety
When working with electricity, no instrument can guarantee complete safety.
It is the responsibility of the person who works with the instrument to op-
erate it in a safe way. Maximum security is achieved by selecting the proper
instruments and following safe working procedures. Safe working tips are
given below:
•
Always work according (local) regulations.
•
Work on installations with voltages higher than 25 V
be performed by qualified personnel.
•
Avoid working alone.
•
Observe all indications on the Handyscope HS6 DIFF before connecting any
wiring
•
Check the probes/test leads for damages. Do not use them if they are dam-
aged
•
Take care when measuring at voltages higher than 25 V
•
Do not operate the equipment in an explosive atmosphere or in the pres-
ence of flammable gases or fumes.
•
Do not use the equipment if it does not operate properly. Have the equip-
ment inspected by qualified service personal. If necessary, return the equip-
ment to TiePie engineering for service and repair to ensure that safety fea-
tures are maintained.
1
or 60 V should only
AC DC
or 60 V .
AC DC
1
Safety