W60B PACKAGE CONTENTS
ASSEMBLING THE DECT PHONE
1. Connect the base station power and the network using Method a or Method b.
a. AC Power Option
Note:
•
If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
•
If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand
Align the snap-fits with the corresponding
holes and push forward, snapping them into
the holes.
b. PoE (Power Over Ethernet) Option
Remove the Base Stand
Remove the snap-fits from the holes horizontally.
DECT IP Phone – W60B & W56H
Quick Start Guide
4