FRS band menu options
Follow the steps below to open the FRS band menu:
1.
If the top of the display does not show FRS 2-Way
Radio, press the
until the display shows FRS.
2.
Wait for the display to show the FRS band screen,
then press the
3.
Refer to the table below for the available options and
settings available in the FRS band.
Menu Option Use It To...
CODE
Lamp Adjust
Contrast
Dual/TriWatch Choose between triple
Key Beep
Exit
Setting CTCSS privacy codes
Normally, any FRS radio that is within range and using the
same channel can hear FRS conversations. To prevent other
radios from hearing you or reduce interference with other
radios, you can enable one of the 142 privacy codes for any
channel. Only radios that have the matching privacy code
will be able to decipher your transmission (see page 46 for a
detailed explanation of CTCSS and DSC privacy codes).
BAND-1/2.5/5W
MENU
Set privacy codes for
each channel
Change the operation
of the display backlight
Adjust the display
contrast
watch and dual watch
Turn the key touch
tones on or off
Close the menu
Uniden MHS550 Radio Owner's Manual
button repreatedly
button.
Available Settings (default
setting is in italics)
No privacy codes set.
See Setting privacy codes
(below) for instructions.
Always On
Timer (see page 22 for details)
Always Off
10 contrast levels
(default = 7)
16/9 TriWatch
16 DualWatch
On
Off
31