Am Band Menu Reference; Using The Fm Band - Uniden MHS550 Owner's Manual

AM band menu reference

Follow the steps below to open the AM radio band menu:
1. If the top of the display does not show AM Radio
Band, press the
the display shows AM.
2. Wait for the display to show the AM band screen, then
press the
3. Refer to the table below for the available options and
settings available in the AM band.
Menu
Use It To...
Option
Lamp Change the operation of the
Adjust display backlight
Contrast Adjust the display contrast
Set channel frequency steps
Tuning
to the US standard (10 kHz) or
Steps
European standard (9 kHz)
Key Turn the key touch and menu
Beep confirmation tones on or off
Exit Close the menu

Using the FM Band

The following features and
options are avilable only when
the radio is in the FM band. To
activate the FM band, press the
BAND-1/2.5/5W
repreatedly until the display
shows FM.
34 Uniden MHS550 Radio Owner's Manual
BAND-1/2.5/5W
button.
MENU
button
button repreatedly until
Available Settings
(default setting is in
italics)
Always On
Timer (see page 22)
Always Off
10 contrast levels
(default = 7)
9 kHz Steps
10 kHz Steps
On
Off
FM FM