Uniden MHS550 Owner's Manual page 34

Note: Privacy codes are specific to each channel.
Make sure the person you want to communicate with
has the same code set on the same channel you do.
1. Open the FRS menu. Select CODE and press
2. The current FRS channel
is highlighted. Use the
CHANNEL UP
CHANNEL DOWN
to select a different
channel. Any channel
that has a privacy code
enabled has an asterisk
in the display.
3. Choose On to enable a
privacy code on this
channel or choose Off to
disable a previously-set
code.
4. Enter a code number
between 001 and 142.
Use the
and
CHANNEL DOWN
buttons to change the
first digit; the
button increases the
UP
number; the
DOWN
the number.
5. When the first digit is correct, press the
to move to the next digit. Enter the remaining two
digits of the code in the same way.
Note: If you try to enter a code number less than 001
or greater than 142, an error tone sounds.
32 Uniden MHS550 Radio Owner's Manual
or
button
CHANNEL UP
CHANNEL
CHANNEL
button decreases
FRS CTCSS FRS CTCSS
Channel 09 Channel 09
Channel 10 Channel 10
Channel 11 Channel 11
CHANNEL 10-OFF CHANNEL 10-OFF
On On
Off Off
Exit Exit
Press the UP or DOWN Press the UP or DOWN
arrow keys to select arrow keys to select
the character then the character then
press the enter key press the enter key
0 0
ENTER
.
ENTER
* *
button