Honda CB Hornet 160R Owner's Manual page 65

(for Drum)
(i). Loosen the "Rear Axle Nut" (1).
(ii). Remove the "Rear Brake Adjusting Nut"
(2).
Disconnect the "Brake Rod" (3) from
the "Brake Arm" (4).
(iii). Loosen the "Drive Chain Lock Nut" (5)
and "Drive Chain Adjusting Nut" (6).
(6)
(5)
(4)
(2)
(1) Rear Axle Nut
(2) Rear Brake Adjusting Nut
(3) Brake Rod
(4) Brake Arm
(5) Drive Chain Lock Nut
(6) Drive Chain Adjusting Nut
Honda Motorcycle & Scooter India Pvt. Ltd.
2. Remove the rear axle nut.
3. Remove the "Drive Chain" (1) from the
driven sprocket by pushing the rear
wheel forward.
4. Remove the "Rear Axle Shaft" (2),
side collar and rear wheel from the
swingarm.
(1)
(2)
(3)
(1) Drive Chain
(2) Rear Axle Shaft
Installation Notes:
To install the rear wheel, reverse the
removal procedure.
Make sure that the slot on the swingarm is
located in the lug in the brake caliper.
(1)
59
CB Hornet 160R