Honda CB Hornet 160R Owner's Manual page 19

Digital Clock
The digital clock will show hours and
minutes up to 11:59.
To adjust the time, proceed as follows:
1. Turn the ignition switch ON.
2. Press and hold the both buttons "SEL" (1)
and "SET" (2) for more than 3 seconds
simultaneously. The clock will be set in
the adjust mode with the hour flashing.
(1)
(1) SEL button
(2) SET button
3. To set the hour, press the SET button
until the desired hour is displayed.
Honda Motorcycle & Scooter India Pvt. Ltd.
• Quick setting - press and hold the
SET button until the desired hour
appears.
4. Press the SEL button when the display
reaches the desired hour.
The minute display will be flashing.
5. To set the minute, press the SET button
(2)
until the desired minute appears.
• Quick setting - press and hold the
SET button until the desired minute
appears.
6. Press the SEL button when the display
reaches the desired minute.
The display will stop flashing.
If the ignition switch is turned OFF or no
operation is performed for 30 seconds
during the time adjustment mode, the clock
will be reset.
The clock will be reset to 1:00 if the battery
is disconnected.
13
CB Hornet 160R