Crankcase Breather - Honda CB Hornet 160R Owner's Manual

every other time the oil is changed, or
each time if necessary.
Oil Drain Bolt Torque:
30 N·m (3.1 kgf·m , 22 lbf·ft)
4. Fill the crankcase with the recommended
grade oil; approximately:
1.0 L (1.0 US qt , 0.9 Imp qt)
(1)
(1) Oil Drain Bolt
(2) Sealing Washer
5. Install the oil filler cap/dipstick.
6. Start the engine and let it idle for 3-5
minutes.
7. 2-3 minutes after stopping the engine,
check that the oil level is at the upper
level mark on the oil filler cap/dipstick
46
CB Hornet 160R
with the vehicle upright on firm, level
ground. Make sure there are no oil leaks.

CRANKCASE BREATHER

Refer to the Safety Precautions on page 40.
1. Remove the left side cover (page 30).
2. Remove the "Crankcase Breather Tube
Plug" (1) from the tube and drain
deposits into a suitable container.
(2)
(1) Crankcase Breather Tube Plug
3. Reinstall the crankcase breather tube
plug.
Service more frequently when riding in rain
or at full throttle.
Honda Motorcycle & Scooter India Pvt. Ltd.
(1)