Honda CB Hornet 160R Owner's Manual page 30

The recommended ''cold'' tyre pressures
are:
kPa (kgf/cm , psi)
Driver Front
Only Rear
Driver and one Front
pillion rider Rear
This vehicle is fitted with tubeless tyre in both
wheels. Compared with ordinary tube tyre,
the tubeless tyre releases slow air leak when
punctured by a nail or other similar object.
For this reason, even though they remain
fully inflated, it is important to regularly
check the tyre for embedded objects.
Inspection
Whenever you check the tyre pressures,
you should also examine the tyre treads
and side walls for wear, damage, and
foreign objects:
Look for:
• Bumps or bulges on the side of the tyre
tread. Replace the tyre if you find any
bumps or bulges.
24
CB Hornet 160R
175 (1.75 , 25)
175 (1.75 , 25)
175 (1.75 , 25)
200 (2.00 , 29)
• Cuts, splits or cracks in the tyre. Replace
the tyre if you can see fabric or cord.
• Excessive tread wear.
Also, if you hit a pothole or hard object,
pull to the side of the road as soon as you
safely can and carefully inspect the tyres
for damage.
Tread Wear
Replace tyres before tread depth at the
center of the tyre reaches the following limit:
Minimum tread depth
Front:
Rear
(1)
(2)
(1) Wear Indicator
(2) Wear Indicator Location Mark
Honda Motorcycle & Scooter India Pvt. Ltd.
1.5 mm (0.06 in)
2.0 mm (0.08 in)