Spark Plug - Honda CB Hornet 160R Owner's Manual

SPARK PLUG

Refer to the Safety Precautions on page 40.
Recommended plug:
Standard:
CPR8EA - 9 (NGK)
NOTICE
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
1. Disconnect the "Spark Plug Cap" (1)
from the spark plug.
2. Clean any dirt from around the spark
plug base.
Remove the spark plug using the "Spark
Plug Wrench" (2) furnished in the tool kit.
3. Inspect the electrodes
porcelain for
carbon fouling. If the erosion or deposit
is heavy, replace the plug. Clean a
wetfouled plug with a plug cleaner,
otherwise use a wire brush.
Honda Motorcycle & Scooter India Pvt. Ltd.
and center
deposits, erosion
(1) Spark Plug Cap
(2) Spark Plug Wrench
4. Check the "Spark Plug Gap" (3) using
a wire-type feeler gauge. If adjustment
is necessary, bend the "Side Electrode"
(4) carefully.
The gap should be:
or
0.8-0.9 mm(0.03-0.04 in)
5. With the plug washer attached, the
spark plug in by hand to prevent
cross-threading.
(2)
(1)
47
CB Hornet 160R