3.1 Description
The Ferno® Mondial® Monobloc Series Cot (called the cot in this manual)
is an emergency patient-handling device designed to transport a
patient in a ground-based ambulance.
The cot is for professional use by a minimum of two trained operators.
It is designed for roll-in loading to help reduce the risk of back injury to
medical service personnel. In this manual, the generic term, "cot" is used
when the feature is shared by all models in the series. The individual cot
name is used when features differ.
COT FEATURES
Ergonomic control handles
●
Choice of red, green, or silver legs
●
Six bed positions and a folded position
●
Compatible with Ferno® FL1 and EFX-Lock fasteners
●
Loading range Model MB64: 670-730 mm (27-29 in.)
●
●
Loading range Model MB70: 730-790 mm (29-31 in.)
EZ Pull™ control handles allow operators to operate the control
●
handle first, before assuming the weight of the cot during position
changes
Positive visual feedback when the legs are locked or unlocked
●
using the leg lock indicator
Control handles not required for raising the cot
●
Smart-Load™ Auto-release system (control handle not required to
●
unlock loading-end legs during loading)
●
Intermediate loading wheels
Pneumatic backrest
●
3-Position shock frame with contour feature
●
3-Position swing-down sidearms
●
Footrest
●
Four 150 mm (6 in.) transport wheels
●
Control-end wheels with wheel locks (two)
○
Loading-end wheels with swivel locks (two)
○
●
Scuff strips w/rollers (optional)
Set of patient restraints
●
8
About the Cot
3 - ABOUT THE COT
Improper use of the cot can cause injury. Use the cot only
for the purpose described in this manual.
Smart-Load™ Auto-release system (control handle not required to
●
unlock control-end legs during loading)
●
Backrest with extending headrest
●
Backrest with airway-management frame
Leg lock (locks both cot legs in Bed Position 1 or Bed Position 3)
●
4 Telescoping carry handles*
●
2 Side-lifting handles*
●
Safety-lock device*
●
Storage tray*
●
Flat or bolster patient pad*
●
Notee:
The cot is compatible with the following Ferno® fastening systems:
Ferno® FL1
●
●
Ferno® EFX-Lock (conversion required, kit available separately)
The following items are included with purchase:
Set of 2 patient restraints: one harness torso restraint and one two-
●
piece leg restraint
Users' manual
●
WARNING
OPTIONAL FEATURES
*Also available separately.
COMPATIBLE FASTENING SYSTEMS
INCLUDED WITH PURCHASE
© Ferno-Washington, Inc. / 234-3480-06 / November 2017