Tilt Up And Down - TOHATSU M2.5A2 Owner's Manual

34
ENGINE OPERATION
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod higher if the bow of
the boat is below horizontal.
Manual Tilt type
7
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral position (3.5B2 only)
3. Tilt up the outboard motor.
4. Remove the thrust rod by pressing
clip as shown picture.
ENOF00053-0
1
2
3
ENOF00229-0
1. Push in
2. Pull out
5. Reinstall the thrust rod in the desired
position securely.
6. Gentry tilt down the outboard motor.
ENOM00060-A

8. Tilt up and down

ENOW00055-0
WARNING
Do not tilt up or down outboard motor when
swimmer(s) or passenger is near to prevent
them from being caught between outboard
motor body and clamp bracket in case the
outboard motor body falls.
ENOW00048-0
WARNING
When tilting up or down, be careful not to
place your hand between the swivel bracket
and the stern bracket.
Be sure to tilt the outboard motor down
slowly.
2
1
ENOF01612-0