REMOVING AND CARRYING THE OUTBOARD MOTOR
ENOM00070-B
1. Removing the outboard
motor
ENOW00064-B
CAUTION
Engine may be hot immediately after operat-
ing and could cause burns if touched. Allow
engine to cool down before attempting to
carry the outboard.
1. Stop the engine.
2. Be sure to close the air vent and the
fuel cock.
3. Remove the outboard motor from
boat and completely drain the water
from the gear case.
ENOM00071-A
2. Carrying the outboard motor
ENOW00065-0
WARNING
Close air vent screw of fuel tank before car-
rying or storing outboard motor and fuel
tank, or fuel may leak, potentially catching
fire.
ENOW00066-1
Do not give a shock to an outboard motor
during transportation. It becames a cause
of breakage.
Do not carry or store outboard motor in
any of positions described below.
Otherwise, engine's exterior parts may be
damaged or water may enter the cylinder
through the exhaust por t and cause
engine problems.
Keep the outboard motor in a vertical
position when carrying.
The optional outboard motor stand is
recommended for keeping the outboard
motor vertical both during transport and
storage.
ENOF02004-0
CAUTION
ENOF02035-0
ENOF02036-0
37
8