Advertisement
leave the end address unchanged. The programming data correspond to the data from
the address 10000 * 2 = 20000 (hexadecimal system) to the address 40000
(hexadecimal system) in the buffer.
Auto Increment of the serial number
Some applications require that the different contents (such as the product sequence
number, the MAC address, etc.) should be written in a certain area for every chip.
The content is called the serial number. This software presents two solutions to
generate the serial number. The first solution is to use the auto increment method. The
software generates the serial number by adding the step value given by the user to the
last serial number. The format is fixed and it meets the general application
requirements. The second solution is to use the user customized software to generate
the device serial number. It has great flexibility.
The specific implementation is to write the current serial number to the buffer
location specified by the user with a default range of 8 bytes ( It can not exceed 4K ).
As for the standard increment method, the following should be specified before the
auto increment method of the serial number is used:
The automatic serial number option: that is, specify a continuous area.
Set the Automatic Start Address,
42
Advertisement
