Advertisement
1. Data Buffer Name.
2. File Name for saving the Data.
3. File Type.
4. Start Address of Data Buffer. The data in the buffer is saved from this address.
5. Data Size to Be Saved. Save the data of the corresponding amount (the unit is
byte).
4.1.1.3 Recent Projects
The full file names (including the full path) of the recent projects have been saved in
the sub-menu of the main menu, it is convenient for the user to re-open the projects.
Refer to the "Project" menu for the definition of the project.
4.1.1.4 Exit
This command closes the programmer software and returns you to the control of the
operating system.
4.1.2 Buffer
The menu manages data in the buffer.
4.1.2.1 Edit
The selection brings up Fuse Buffer Edit window if the device buffer type is Fuse;
25
Advertisement
