Download Print this page

Xeltek SUPERPOR/6100N Manual page 65

Advertisement

good knowledge of this chip; otherwise the chip may be damaged.
Pin check error. Ignore: error occurred during the pin check. Ignore it and continue.
Pin check error: An error occurred during the pin check, and the operation ceased.
Programmer not found: the programmer is not connected to the PC or connected
improperly. Please connect it and refer to "Installation".
Programmer not ready: shut down the power switch and turn it on again after a few
seconds.
Programmer is running: The programmer hardware is operating. Please wait until the
operation is finished.
File open error: The 'open' file operation has failed.
Out of Memory: The memory overflows.
Production mode isn't available for this chip: Since the production mode is dependent
on the pin check, the chips without pin check function are not applicable for
production mode.
Cancel production mode: Cancel the production mode.
Too long file name: A too long file name is used.
User cancel: The user has used the 'cancel' operation.
Can't cancel: The 'cancel' operation has failed.
Not a project file: The selected file is not a project file. After the software is updated
the software may not be able to identify the file created previously. Now the user
needs to create the file again.
Appendix
The support for the customers
XELTEK software only needs the minimum technical support. The program is
handed over to the user along with a user manual. If the user can not find a solution to
to his problem, he can contact the local sales agent, the distributor or XELTEK for
technical help. If the local sales agent or distributor can not solve your problem, you
can ask XELTEK for technical help through the telephone in the normal working
hours (8:30 --- 17:30, except for the holidays and festivals). You should get your
product serial number ready before you make a telephone call, otherwise we may not
be able to answer your question.
XELTEK periodically publishes the upgraded software at the website of the
corporation. The legal user can download it and upgrade his software. The non-user
can download it too, but just can only be used for assessment. The software can be
65

Advertisement

loading

This manual is also suitable for:

Superpor/611sSuperpor/610p