Advertisement
Buffer clear at IC change: clear the buffer after device being selected
Buffer clear on data load: clear the buffer before load file data
Buffer save when exit: save buffer data when exit. When entering the system
next time, load the saved data automatically.
4.1.2.3 Encryption table
The encryption table is a special data area. A data buffer corresponding to the
encrypted data is called an encryption table. Whether an encryption table exists or not
depends on the data manual.
The data of the encryption table are written into a chip by using the function item
"Encryption" in the window of "Function Items for Operations on Devices".
Attention should be paid to the following two points (in most cases):
The chip can not be checked after the data is written into the encryption table.
The data of the encryption table can not be read.
4.1.2.4 E-Fuse
If the data type of the device is Fuse and the JEDEC file has E field, you can open the
30
Advertisement
