Advertisement
Protect_All: The same as 'Protect'.
Lock_Bit: A protection method. Please refer to the Device Data Manual for the
detailed information about the operations. Take Atmel At89c51 as an example, it
has three operation items: Lock_Bit1, Lock_Bit12, Lock_Bit123. Their meanings
can be found in the data manual.
The above are commonly used functions. For some devices, which have special
requirements and functions, the operation function window may be different. For
detailed information, the user could refer to:
The manual of the device data.
The Dev. Information.
The technical support of XELTEK.
4.7 Operation Info Window
This is for the interaction between the software and the user. The operation process,
the operation result and the historical records of information, etc. will be displayed in
this window.
The above is an example. The example appears after the device is selected and the
operation "Auto" is performed. The meanings are explained as follows:
ATMEL AT89C51: The device selection is correct. If any error occurs, please
refer to "Correction according the error information".
Erasing.....: is erasing.....
Erase OK!: Erased successfully.
Blank_check......: Blank check is being performed.
Blank_check OK!: Successful Blank_check.
Program.....: is programming.
Program OK!: Program successfully!.
Verifying......: is verifying.
Verifying OK!: Verify successfully.
Lock_Bit 1&2&3....: protecting. Refer to the Data Manual for
56
, the
AT89C51
Advertisement
