Download Print this page

Ratio Electric SMART BOX Manual page 3

Dynamic charging + energy meter
Hide thumbs Also See for SMART BOX:

Advertisement

I M P O R T A N T S A F E T Y I N S T R U C T I O N S
Carefully read these instructions and the charging instructions in your vehicle
owner's handbook before charging your electrical vehicle.
Take special note of all information marked with the following symbols:
Note:
This means pay particular attention. Notes contain helpful suggestions
Safety Guidelines
Use this Smart Box to charge electric vehicles equipped with a
conductive charge port only. See the vehicle's owner's handbook to
determine if the vehicle is equipped with a conductive charge port.
Make certain the Smart Box's supply cable is positioned so it will not be
stepped on, tripped over, or otherwise subjected to damage or stress.
There are no user serviceable parts inside. Refer to the Customer
Support section in this manual for service information. Do not attempt to
repair or service the Smart Box yourself.
Do not operate your Smart Box if it or the supply cable or housing is
visibly damaged. Switch off the MCB in the electrical cabinet and contact
your Service Representative for service immediately. Refer to the
Customer Support section in the manual for information on the Service
Representative in your area.
Caution: This symbol means be careful. You are capable of
doing something that might result in damage to equipment.
Warning: This symbol means danger. You are in a situation
that could cause bodily injury. Before you work on any electrical
equipment, be aware of the hazards involved with electrical
circuitry and standard practices for preventing accidents.
SMART BOX / Version: EV050
3

Advertisement

loading