Advertisement
6
12
CHARGER ERROR
CHARGER
NOT READY
ERR: ........................
7.
Connect in-coming power to the left
terminal block.
www.ratio.nl
Single Phase :
L1=Brown
N= Blue
Earth= Green/Yellow
3 PHASE CHARGE STATION
3 Phase
L1=Brown
The charging display depends on the chosen charger mode -> MANUAL, FIXED 16,
L2=Black
FIXED 32, SMART. With the right arrow button you can always enter the screen with
L3=Grey
N=Blue
more information about the consumption of the charger.
Earth=Green/Yellow
READY TO
CHARGE (A)
mode: smart (m)
8.
Close bottom cover and carefully slide metallized cover over the Charge Station.
www.ratio.nl
IMPORTANT:
READY TO
CHARGE (B)
mode: smart (m)
www.ratio.nl
CHARGING
I set [A] :
Pt [kW] :
Et [kW] :
lh : x x x x x x ( x x )
www.ratio.nl
lh – x x : measured current per phase ( x x ) :
setting I HOME MAX
As in all other chosen charger modes you can reach the next screen with the right
arrow button.
In case of the charger error, you will see the error screen
with the error code. If multiple errors occur the codes will
alternate.
By error message please contact Ratio Electric for
support.
To return into the setup menu please press the middle
button for 5 seconds.
CHARGING SMART MODE
Charger ready, not connected to EV
smart (m) -> master
smart (s1) -> slave 1 / smart (s2) -> slave 2 / smart (s3)
-> slave 3
OUTLET VERSION - before closing outlet cover,
be sure the outlet is unlocked!
Charger connected to EV
x x
x . x
Charging display
kWh
I set [A] – available current
Pt [kW] – power
Et [kWh] – total consumption (never reset)
Advertisement
