Advertisement
6
10
7. SETUP CALsensor
SETUP
<- CALsensor ->
7.
Connect in-coming power to the left
terminal block.
The correct setting is 3.0.
Single Phase :
L1=Brown
8. READOUT -> ERR MEMORY
N= Blue
Earth= Green/Yellow
SETUP
3 Phase
<- ERR MEMORY ->
L1=Brown
L2=Black
E 1:
L3=Grey
E 2:
N=Blue
E 3:
Earth=Green/Yellow
E 4:
E 5:
8.
Close bottom cover and carefully slide metallized cover over the Charge Station.
Confirm with the middle button to enter
the error memory screen. You can see max. 10 error codes.
With the left and right arrow buttons you can scroll to the last code.
To return into the setup menu please press the middle button for 5 seconds.
IMPORTANT:
In case of error message please contact Ratio Electric for support.
U S E R I N F O R M A T I O N
1 PHASE CHARGE STATION
The charging display depends on the chosen charger mode -> MANUAL, FIXED 16,
FIXED 32, SMART.
With the right arrow button you can always enter the screen with more information
about the consumption of the charger.
Iactual: xx.x
CALVAL
<- x.x ->
OUTLET VERSION - before closing outlet cover,
be sure the outlet is unlocked!
Advertisement
