Mounting; Orientation; Rigging - Chauvet DJ DMX-4 User Manual

Hide thumbs Also See for DMX-4:
Table of Contents

Advertisement

S
ETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

The DMX-4 may be mounted in any position; however, make sure adequate ventilation is provided around
the product.

Rigging

Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
When power linking multiple products, mount the products close enough for power linking cables to
reach.
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Alternate Rigging
If you are using this product with truss or a lighting stand, there is an alternate rigging configuration
available. This option is ideal for hanging the product without using a mounting clamp.
1.
Unplug the product from power.
2.
On the back of the product, locate the six Phillips-head screws.
3.
Use a Phillips-head screwdriver to remove these screws.
4.
The mounting bracket will now come off. Be careful not to damage the internal components of the
dimmer, as they are exposed during this step!
5.
Flip the mounting bracket (back panel) around.
6.
Reattach the panel by securely reinstalling the six Phillips-head screws.
DMX-4 User Manual Rev. 3
for weight information.
Truss/Pipe Mounting
Wall Mounting
INPUT VOLTAGE EQUALS OUTPUT VOLTAGE
OUTPUT: 5 A / CH; 15 A MAX
CH-1
CH-2
CH-3
CH-4
DMX SIGNAL
DMX
STANDALONE
Safety
Notes.
Wall Mounting Surface
Wall Mounting Surface
Page 7 of 14

Advertisement

Table of Contents
loading

Table of Contents