Table of Contents
Advertisement
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
Button
Function
<MODE>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<MENU>
Press to activate a menu option or a selected value
Dimmer or Switch Mode
The DMX-4
has two different methods for controlling the output of the four channels. To set this via the control panel,
do the following.
1.
Unplug any units from the four output channels.
2.
Connect the DMX-4 to a suitable power outlet.
3.
Turn the product on.
4.
Press <MODE> repeatedly until A001–A512 appears on the display.
5.
Press <MENU> repeatedly until S1__, S2__, S3__, or S4__ appears on the display. This setting
can be set differently for each of the four channels. Navigate to the desired channel.
6.
Use <UP>
or <DOWN>
channel selected in the previous step.
7.
Repeat steps 5 and 6 to set each of the other channels, if necessary.
Menu Map
Mode
Menu
Starting
Address
Personality
DMX Mode
Switch/Dimmer
Switch: oN
Dimmer: oF
Power Toggle
Program
Standalone
Run Speed
Mode
Dimmer
Page 8 of 14
to select either __oN (Switch mode) or __oF (Dimmer mode) for the
Display
Description
A001–A512
Selects the DMX starting address
CH:01
1-Channel mode
CH:02
2-Channel mode
CH:04
4-Channel mode
S1__
Channel 1 function
S2__
Channel 2 function
S3__
Channel 3 function
S4__
Channel 4 function
Turns power on/off as a DMX signal is detected.
SO00–SO30
Can assign up to a 30 second delay.
P:01–P:16
Automatic programs
SP:01–SP:99
Automatic program speeds Slow to fast
d000–d100
0–100%
O
PERATION
DMX-4 User Manual Rev. 3
Advertisement
Table of Contents
