Changing Channels, Flash And Page - Uniden XSA650 Owner's Manual

The flash + 2 call waiting
procedure toggles between
the incoming and original
call (and visa versa).
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.
The paging feature does
not work when the phone is
in use.
16

Changing Channels, Flash and Page

To change channels or access call waiting while the phone is in use, or to use the
one-way page to locate the Handset, follow these steps:
Press chan
Changing
Note: Change channels to help
Channels
eliminate background noise
If the call waiting tone sounds,
Flash
press flash
(Australia)
waiting call. (Aus only)
- OR -
To return to the original caller
press flash
If the call waiting tone sounds
Flash
during a call, press
(New
toggle between the incoming
Zealand)
and the original call.
Note: When page is pressed on
Page Find
the Base Unit, the Handset
beeps.
Note: If you do not have the call waiting service, pressing flash may disconnect the
current call.
If the above flash operation does not work and you have the "Easy Call" service
follow your service provider's instruction to operate "call waiting".
Handset
then 2 to accept the
then 1 . (Aus only)
flash to
Base Unit
Note: You must use the
Handset to change channels
Note: The Base Unit does not
have flash . You must use the
Handset to access call waiting.
Note: The Base Unit does not
have flash . You must use the
Handset to access call waiting.
Press page on the Base Unit to
locate the Handset.