Changing Channels, Hold, Mute, And Flash - Uniden XC345 Operating Manual

Changing Channels, Hold, Mute, and Flash
To change channels, place a call on hold, mute a call, or access call waiting
while on the phone, follow these steps:
*
Note: If you do not have any special phone services, pressing FLASH
might disconnect the current call.
If the above FLASH operation does not work and you have
Telecom's easy call service connected then follow Telecom's
instructions to operate "call waiting".
30
HANDSET
BASE
Press
(CHANNEL)
Note: You must use the
CHANGING
Note: Change channels to
Handset to change
CHANNELS
help eliminate background
channels.
noise.
1) Press
1) Press
(INT'COM)
PLACING A
Note: The phone will
Note: The phone will
CALL ON
begin to ring, indicating
be.Ginto ring, and the
HOLD
the call is on hold.
(SPEAKER)
LED willblink,
2) Press to continue
indicating the call is on
call.
hold.
2) Press
(INT'COM)
or
(SPEAKER)
to
continue call.
MUTE
Note: You can only mute a
Press to disable the
call while using the Base
Base Unit microphone.
Unit.
The Mute LED lights.
Note: You will be able to
hear the caller, but they
will not hear you.
If the call waiting tone
If the call waiting
sounds, press (FLASH)to
tone sounds, press (FLASH)
accept the waiting call.
to accept the waiting call.
FLASH
-OR- -OR-
If you have finished a call
If you have finished a call
and want to make another and want to make another
call, press
(FLASH)
to hang
call, press (FLASH)to hang
up and get a dial tone.
up and get a dial tone.