Using Your Phone; Making And Receiving Calls; Changing Channels, Flash, And Page/Find - Uniden EX905 User Manual

Making and Receiving Calls

The following features of the EX 905/925 phones are different
depending on the Handset's location when you make or receive a call.
ANSWER CALL Pick up Handset (AutoTalk).
1) Pick up Handset.
2) Press
MAKE CALL
3) Listen for dial tone.
4) Dial the number.
Press
— OR —
HANG UP
Return Handset to Base. (AutoStandby)
1) Pick up Handset.
2) Press
REDIAL
3) Listen for dial tone.
4) Press
Sometimes when you press
error tone and the phone will not disconnect. If this happens, place
the Handset on the Base Unit or press
Handset close to the Base Unit.

Changing Channels, Flash, and Page/Find

To change channels or access call waiting while the phone is in use, or to
use the one-way page to locate the Handset, follow these steps:
Press
CHANGING
CHANNELS
eliminate background noise.
If the call waiting tone
sounds, press
the waiting call.
FLASH — OR —
If you have finished a call and
want to make another call,
press
get a dial tone.
PAGE/FIND
Press
Unit to locate the Handset.
EX 905/925

Using Your Phone

Handset On Base
.
talk
.
talk
.
talk
.
redial
talk
Press These Keys
.
channel
Change channels to help
to accept
flash
to hang up and
flash
on the Base
page/find
Handset Off Base
Press
talk
1) Press
2) Listen for dial tone.
3) Dial the number.
1) Press
2) Listen for dial tone.
3) Press
to hang up the phone, you may get an
again while holding the
talk
A click similar to when
pressed. There may be a brief
pause as your phone searches
for a clear channel.
A click, a short pause, then the
caller (if you were on a call).
— OR —
A click, and then a dial tone so
you can make a different call.
The Handset will beep more
than 5 times.
.
.
talk
.
talk
.
redial
You Will Hear
flash
is
25