MAKER MADE MASLOW CNC Setting Up page 25

TERMS OF USE
This work is licensed under the
CREATIVE COMMONS
Attribution-NonCommercial-NoDerivatives
4.0 International License
To view a copy of this license
visit http://creativecommons.org/licenses/by-nc-nd/4.0/
or send a letter to
Creative Commons
PO Box 1866
Mountain View, CA 94042
YOU ARE FREE TO:
Share
— copy and redistribute the material in any medium or format
The licensor cannot revoke these freedoms as long as you follow the license terms.
UNDER THE FOLLOWING TERMS:
Attribution
— You must give appropriate credit, provide a link to the license, and
indicate if changes were made. You may do so in any reasonable manner, but not in
any way that suggests the licensor endorses you or your use.
NonCommercial
— You may not use the material for commercial purposes.
NoDerivatives
— If you remix, transform, or build upon the material, you may not
distribute the modified material.
No additional restrictions
— You may not apply legal terms or technological measures
that legally restrict others from doing anything the license permits.
NOTICES:
You do not have to comply with the license for elements of the material in the public
domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The license may not give you all of the permissions necessary
for your intended use. For example, other rights such as publicity, privacy, or moral
rights may limit how you use the material.
LAST UPDATE 06.11.19 INSTALLING THE Z AXIS PG. 5