Installing The Z-Axis - MAKER MADE MASLOW CNC Setting Up

FROM THE MAKERMADE LEARNING LIBRARY, WITH THANKS TO THE MASLOW COMMUNITY
1.4 INSTALLING THE Z AXIS
TOOLS NEEDED:
Phillips-head screwdriver
T10 Torx Screwdriver
Safety goggles
Computer or tablet
Ground Control software (free)
In manual use, your router has a knob/screw assembly that you turn in order to move
the bit up and down. The Z axis is designed to replace that, saving you painstaking
manual adjustments
These instructions are tailored to the Rigid router, if you have a different router,
procedure may vary.
THIS WORK IS LICENSED UNDER THE CREATIVE COMMONS ATTRIBUTION-NONCOMMERCIAL-NODERIVATIVES 4.0 INTERNATIONAL LICENSE.
MATERIALS LIST:
Part #14 Z Axis Motor
Part #15 Z Axis Motor Cable,
Part #16 Z Axis Motor Mounts (2)
Hardware Bag Z
(2) Zipties