MAKER MADE MASLOW CNC Setting Up page 7

Spacer & back
leg both go
beneath kicker
KICKER 30"
1.75"
11.5"
STEP 3/4A ATTACH KICKERS TO FRONT LEGS
• Kickers at 90° angle to front legs
• Kickers 11.5" from bottom of front legs, and
overhanging by 1.75"
• Screw through top of kickers into front legs
• Screw through top of kickers into spacers
• Flip each assembly over for next step
KICKER
STEP 3/4C POSITION BACK LEGS
• Rotate back legs out to end of kickers
• Screw bottom of back legs to kickers
• Add more screws to top of back legs
LAST UPDATE 05.22.19
90º
KICKER 30"
STEP 3/4B ADD BACK LEGS
• Place back legs on top of front legs,
aligning bottom ends
• Mark center of back legs 1" from top end
• Screw through top center of back legs
into front legs at marked spot
• Only 1 screw per leg, NO GLUE
LEGS ARE NOW COMPLETE!
KICKER
Next steps are most easily done
with front legs horizontal to floor,
as shown. Prop with scraps to keep
things level.
KICKER
SPACER
BUILDING THE DEFAULT FRAME PG. 4
KICKER
SPACER