Step 11
You will need:
6 x Cam Bolts
(H3)
Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown.
Step 12
You will need:
8 x Dowels
(H1)
6 x Cam Nuts
(H4)
Insert 8 x Dowels (H1) into the holes of Side Panels (P2,P3), Divider (P4) and Rail (P9).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2,P3) and Divider (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
H3
H3
H3
(P1)
H1
H1
H4
(P4)
H1
(P2)
H3
H3
H3
(P1)
H1
H4
H4
(P3)
Page 8