fantastic furniture COMO TALLBOY 6 DRW Assembly Instructions Manual page 5

Step 4
You will need:
1 x CL Runner
Track
(H6)
3 x Small
Screws
(H5)
Attach 1 x CL Runner Track (H6) to Divider (P4) with 3 x Small Screws (H5).
Step 5
You will need:
1 x CR Runner
Track
(H7)
3 x Small
Screws
(H5)
Turn Divider (P4) over to the other side,then attach 1 x CR Runner Track (H7)
with 3 x Small Screws (H5).
Step 6
You will need:
1 x Long Screw
(H2)
1 x Cam Bolt
(H3)
1 x Cam Nut
(H4)
Attach 1 x Cam Bolt (H3) into Rail (P6).
Insert 1 x Cam Nut (H4) into the hole of Divider (P4).
Rotate the cam nut so the arrow point towards the incoming cam bolt.
Push Divider (P4) into place and tighten the cam nut.
Attach Rail (P9) to Divider (P4) with 1 x Long Screw (H2).
H5
H5
H6
H5
H5
H2
(P9)
(P4)
H3
H4
(P6)
H5
(P4)
H5
H7
CR
(P4)
This is how a cam nut works ........
H5
CL
H6
H5
H7
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Page 5