fantastic furniture COMO TALLBOY 6 DRW Assembly Instructions Manual page 9

Step 13
You will need:
4 x Small Cam
Bolts
(H10)
Attach 4 x Small Cam Bolts (H10) into Drawer Front (P13).
Step 14
You will need:
4 x Small Cam
Nuts
(H11)
Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P15) and (P16).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P15) and (P16) into place and tighten the cam nuts.
Step 15
Slide Drawer Base (P17) into the groove in
Drawer Sides (P15) and (P16).
H10
H11
(P15)
H11
(P13)
(P15)
(P13)
H10
(P13)
This is how a cam nut works ........
(P16)
H11
(P17)
H10
H10
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H11
(P16)
Page 9