Table of Contents
Advertisement
Step 2:
Highlight the Speed Dial sub-menu and press
Step 3:
Highlight the 1-Touch Dial sub-menu and press
Step 4:
Press the unused 1-touch dial key you wish to program.
Step 5:
The phone will prompt you to enter a phone number. Enter a maximum of 32
digits. If you wish to eliminate the four-second delay before dialing, press the
key at the end of the phone number. Press the
DIAL
clear the entered digits and return to the 1-Touch Dial sub-menu.
Step 6:
After entering the phone number, press
phone number is stored.
Clearing or Editing the 1-Touch Number
Step 1:
Enter the 1-Touch Dial sub-menu as describe above.
Step 2:
Press the already-programmed 1-touch dial key you wish to clear or edit.
Step 3:
If you want to edit the phone number, change the number and press the
key. If you want to clear the phone number, simply press the
editing the phone number.
Step 4:
You will hear a long beep confirming your changes to the 1-touch dial key.
Programming the 2 Touch Number
Step 1:
Press the
MENU
Step 2:
Highlight the Speed Dial sub-menu and press
Step 3:
Scroll down to highlight the 2-Touch Dial sub-menu and press
Step 4:
Press the 2-touch dial key (default is programmable key 6) and then press the dial
key (0-9) you wish to program.
Step 5:
The phone will prompt you to enter a phone number. Enter a maximum of 32
digits. If you wise to eliminate the four-second pause before dialing, press the
key at the end of the phone number. Press the
DIAL
clear the entered digits and return to the 2-Touch Dial sub-menu.
Step 6:
After entering the phone number, press
phone number is stored.
key to enter the Setup menu
again.
MENU
.
MENU
key at anytime to
CANCEL
. You will hear a long beep, and the
MENU
MENU
again.
MENU
key at anytime to
CANCEL
. You will hear a long beep, and the
MENU
Rev. 1.0, © UAC, May, 2004
UIP200 User's Manual
Page 24 of 27
MENU
key without
.
MENU
Advertisement
Table of Contents
