Table of Contents
Advertisement
New Message LED
The new message LED on the handset flashes when you have new messages in your
answering system. The LED stops flashing when all new messages are played back.
Using Your Answering System
The message counter displays the number of messages
stored in memory. If the display flashes, then there
are new messages waiting for you. The answering
system is designed to play your new messages first.
After you play all your new messages, you can then
play your old messages.
Playing your messages
1) When the base is in standby mode, press
The system announces the number of new and old messages while the message
counter displays only the number of new messages. The time and day that each
message was received is announced after the message is played. The message
counter will then display the number of current stored messages.
2) When all new messages have been played, you hear a confirmation tone, and the
system announces "End of messages." The system returns to standby. After you
have reviewed your new messages, you can play your old messages by pressing
play/stop again. Once you have listened to a new message, it then becomes
an old message. The old messages will be played in the order in which they were
received.
w w w . u n i d e n . c o m
play/stop.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 5 8 ]
note
The time stamp will not
be heard until you have
set the time.
Advertisement
Table of Contents
