Uniden TRU8888 Series Owner's Manual page 55

2) Once you have recorded a personal greeting, press the CHANGE soft key to
choose the greeting. The selected outgoing message is played. Each time you
press the CHANGE soft key, the phone switches the outgoing message between
the prerecorded and the personal outgoing message.
To delete the personal greeting, press the DELETE soft key.
Setting a PIN Code
Security code selects a two-digit Personal Identification Number (PIN) code. A PIN
code is required to play your messages from a remote location.
1) Press the MENU soft key. Select the Answ. Setup menu,
and then the Security Code submenu.
2) Enter a two-digit PIN code (01-99) using the number
keypad (0-9).
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Ring Time
Ring Time allows you to set the number of rings the caller hears before your answering
system plays the outgoing message. You can set the ring time to answer after two, four,
or six rings. If you enable the Toll Saver (TS), the answering system picks up after two
rings if you have new messages and after four rings if there are none.
1) Press the MENU soft key. Select the Answ. Setup
menu, and then the Ring Time submenu.
2) Press volume up/down to select a Ring Time (Toll
Saver, 2 Times, 4 Times, or 6 Times).
3) Press the OK soft key. You will hear a confirmation tone.
w w w . u n i d e n . c o m
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 5 4 ]