Uniden TRU8888 Series Owner's Manual page 51

Deleting all Caller ID names/numbers
1) When the phone is in standby mode, press cid/vol
(caller id/exit on the base).
2) Press the
DELETE
3) Press volume up/down to choose
4) Press the soft key. You will hear a confirmation tone.
OK
Calling a Party from the Caller ID List
Standby mode
1) When the phone is in standby mode, select the Caller ID message (see "Viewing
the Caller ID List" on page 48).
2) To have the phone dial a "1" before the displayed Caller ID number, press
tone/<. To have the phone dial the stored area code before the displayed Caller
ID number, press #/>.
3) Press talk/flash or speaker on the handset or speaker on the base or pick up the
corded handset. The displayed phone number dials automatically.
w w w . u n i d e n . c o m
soft key. appears.
D e le t e A ll ?
.
Ye s
note
•When a long distance
call has been set, "
appears in the display.
/
*
•You cannot make a call
from the Caller ID list
if your phone is
connected to a private
branch exchange
(PBX).
C A L L E R I D [ 5 0 ]
1
"