Table of Contents
Advertisement
[ 6 3 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
• If you press end before the answering system answers, the phone will return to standby.
• When the answering system does not answer within 6 seconds, you hear a beep and the
phone will return to standby.
• When you receive a call, the remote operation is canceled.
• You can change the handset volume during a remote operation.
• During the remote operation
base.
• If you have new messages and old messages, after you have reviewed your new
messages, you can play your old messages by pressing 2 again.
•To switch to normal conversation, press speaker on the handset.
3) Enter a command within 30 seconds. Select a command from the following chart:
Remote Key Function
|<<
/1
Repeat a Message*
/2
Play incoming Messages**
>>|
/3
Skip a Message
∅
/4
Delete a Message
/5
Stop Operation
*
For the Repeat a Message function, press 1 within about four seconds to repeat
the previous message, or press 1 after about four seconds to repeat the current
message.
** Messages will be played in the order in which they were received. The time and
day that each message was received is announced after the message is played.
*** For the Memo Record and Greeting Message Record function, the first time you
enter the corresponding command, it starts the Recording function. If you
want to stop the recording, enter the command again.
Re m ot e A ns w er i ng M ac h in e o pe r at i on
6
Answering System On
7
Memo Record/Stop***
8
Greeting Message Record/Stop***
9
Answering System Off
0
Help
appears on the
w w w . u n i d e n . c o m
Advertisement
Table of Contents
