Find Handset; Flash And Call Waiting; New Message Led - Uniden WDECT3355 Owner's Manual

When speaking on the base
1) Press or
the 3-way conversation.
2) To hang up, return the handset to the cradle, or press
key on the handset. The base will still be connected to the
call.

finD hanDSET

To locate the handset, press mute/find handset on the base
when the base is in standby mode. All registered handsets
beeps for 60 seconds, and Paging appears on the handset
display. To cancel paging, press any key on the handset or
mute/find handset on the base.

flaSh anD Call WaiTing

If you have Call Waiting service and a call waiting tone sounds
during a call:
AUSTRALIA:
Press on the handset or flash on the base,
then press 2 to switch between callers.
NEW ZEALAND:
Press on the handset or flash on the base to switch
between callers.

nEW MESSagE lED

The new message LED on the handset flashes when you have new messages in
your answering system. The LED stops flashing when all new messages are played
back (see "Using your Answering System" on page 49).
speaker on the handset to initiate
[ 28 ]