Uniden TRU8888 Series Owner's Manual page 41

6) If you store the phonebook entry in the handset,
D i st i nc t iv e R in g
move the pointer to one of the Distinctive Ring options
and then press the OK soft key.
If you choose not to store a Distinctive Ring, simply
select the "No Selectn" option.
7) appears. Press volume up/down to move the
Speed Dial
pointer to select the Speed dial location (10 locations:
SPD1-SPD0).
If you choose not to store the name/number as a Speed
Dial, simply choose the "No Selectn" option.
8) Press the OK soft key. You will hear a confirmation tone, and
display.
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in standby mode, select the Caller ID message to be stored
(see "Viewing the Caller ID List" on page 48). Then press the EDIT soft key.
2) Press volume up/down to select
appears. If the Caller ID message is already stored in memory, you will
E d it N am e
hear a beep and
T h is d a ta i s a lr e ad y s to re d ! !
stored.
3) To complete the setting, follow the steps 3-8 in "Storing and Editing Phone
Numbers, Names, Distinctive Rings and Speed Dial" on pages 38-40.
w w w . u n i d e n . c o m
appears. Press volume up/down to
St or e i n to PB ?
appears in the
Done!
, then the OK soft key.
appears. The number will not be
S t or e /
P H O N E B O O K [ 4 0 ]