Uniden TRU8888 Series Owner's Manual page 10

note
•Use only the supplied
[AD-800] AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
[ 9 ] G E T T I N G S T A R T E D
B. Connect the base unit
1) Connect to the handset cord to the left side of the
phone and the corded base handset.
2) Connect AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
Place the base unit close to the AC outlet so that
you can unplug the AC adapter easily.
3) Connect the telephone line cord to the TEL LINE
jack.
4) Set the base on a desk or tabletop. Place the corded
base handset on the base.
If your telephone outlet isn't modular, contact
your telephone company for assistance.
w w w . u n i d e n . c o m