Installing A Tape Cartridge - Panduit MP300 Operator's Manual

2. Installing a tape cartridge

CAUTION
• Make sure that the power is turned off.
• Be sure to use the specified tape cartridge.
• Make sure the top cover is closed firmly.
• If you opened the top cover while a tape cartridge is
installed, check that the tape end is put into the tape
eject slot before beginning operation.
• Take care to keep the label for detecting the tape
cartridge and the sensor of the printer clean.
Otherwise, tape may no longer be detected correctly.
• Do not touch the sensor directly with your fingers.
Label for detection
Sensor
1. Rewind the ink ribbon if
needed.
Use a pen
or a pencil.
2. Open the top cover.
Top cover
Start Here
3. Install a tape cartridge.
Put the tape end
into the tape eject
slot.
4. Close the top cover.
Top
Specifications
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Technical Support
9